The vapour blasting process is suitable for Aluminum, Bronze, Magnesium, Titanium, Brass, Copper etc.It will gently clean the surface without damage to gasket faces etc,produces a satin finish which will handle without picking up finger marks and gently peens the surface so can help reduce porosity in castings. It will gently clean the surface without damage and leave a nice satin finish which is very easy to keep clean. 

This process uses water and an abrasive medium accelerated from a nozzle with compressed air to provide a very effective environmentally friendly closed loop surface cleaning. 

The glass bead used in the system is mixed with water to a slurry and blasted at the component. The water buffers and lubricates the particles on impact allowing very fine finishes to be produced without damage to the component. 

Please be aware that any item that rusts can not be done with this process as the item oxodises instantly. 

All bearings & valves etc have to be removed and anything lacquered or painted will need to be stripped prior to blasting as this process is to passive, this can be done by yourselves or by us if you require us to.

Please feel free to contact us with any quiries you may have.

What do we blast?

Vapour Blast’s extensive knowledge and experience allows us to match our technical expertise with individual customer requirements and objectives. With expertise in complex technology solutions, Vapour Blast can implement a stable, reliable and safe environment for almost any blasting requirement however large or small.